What you'll need:
Wood to make the frame, or if you don't want to make one, then use an old picture frame. I made the inside of the frame 10 inches square, so with the 45 degree angle cuts, you'll need an 8' board total.
Piece of fabric. I used a scrap of painter's canvas.
Wood glue to glue the frame together.
Spray paint. You can use one color as I did here, but if you want the moose to be a different color, you'll need two colors.
A moose picture, printed from the Internet. I Googled "moose crossing picture" and copied and pasted the image into Microsoft word. You can then print it out. I used my printer, which has a scanner, to re-size the image to what I wanted. Print on some card stock then cut out the picture.
Stencil Adhesive.
Staple gun
First, make the frame if you don't buy one already made. I used pallet wood because it's weathered and gives that re-claimed wood look.
Make sure to get pieces that are the same width so the 45 degree angles at the corners match up. I used my table saw with a sled that I made especially for 45 degree angles. You can also use a miter saw or a hand saw and miter box.
It took me a little practice to make this kind of cut fit right, so if you don't feel comfortable with it, you can make the frame without the 45 degree angle on the edges. Just cut straight pieces to the desired lengths and piece them together.
I used a biscuit joiner to put the frame together, but glue alone, if you clamp it together good, would probably work. A pocket hole jig is a great option as well, and really easy to do. You can find videos on YouTube that show how to make pocket holes. Pocket holes are great for many woodworking projects.
When the glue was dry, I used some steel wool to apply some Briwax (light brown), which gives the old wood a great look.
Once the frame is ready, you're ready to make the moose part. First, cut a piece of canvas to fit the opening of the frame, plus some extra to allow you to staple it onto the frame.
Lay the fabric on a flat surface. You may want to put some paper down first, since you'll be using spray paint. Spray the back of the moose, or whatever picture you decide to use, with the stencil adhesive. Stick the moose to the center of the fabric. Then spray with the desired color of spray paint.
When the paint dries, gently peel the cutout off the fabric.
This is what you get. If you want the moose to be a different color, spray the fabric that color first, allow it to dry completely, then stick the cutout on and spray over with another color, like above.
Now center the image and staple on the back of the frame.
It's done.
I'm thinking a rooster may look good instead of the moose, or a Christmas tree for the holidays.
Thanks for reading.
No comments:
Post a Comment